The UTC018 is a 1000W Power Module for use in a MicroTCA chassis providing up to 800W output power. It is fully compliant with the MicroTCA.0 Revision 1.0 specification; including dual-redundant I2C buses (IPMB-0). The module is 12 HP, taking two full-size slots in a chassis. The UTC018 is hot-swappable and fully redundant when used in conjunction with a second module. Multiple temperature sensors are included on-board to monitor for over-temperature conditions within the unit. The current is continuously measured for each of the modules and reported to MCH for any faults. Once installed in the system, the firmware is upgradable via the Shelf Manager. The UTC018 can be configured to power and enable the modules without the presence of an MCH during development.
Key Features
ØDouble-module, 12HP size module per AMC.0
ØUniversal AC input (85 to 265V), 1000W
ØProvides power up to 12 AMCs, 2 MCHs and Cooling Units
ØVery low ripple voltage on +12 V
ØHot swappable with two banks of 256K flash for redundancy
ØDual IPMI bus
Ø32–bit RISC processor
ØBlue, red, amber and red LEDs
ØIPMI 2.0 and HPM.1 compliant
ØMenu driven software for ease of configuration
ØCurrent sensor per slot
