The VadaTech UTC014 is a 241/460W power module for use in a μTCA chassis. The power module runs at 84% efficiency when running at maximum load. This results in 200/400W (available to the system). It is fully compliant with the MicroTCA.0 and MicroTCA.1 specifications; including dual-redundant I2C buses (IPMB-0).
The UTC014 is fully redundant when used in conjunction with a second instance of the module. It provides power to the twelve slots, two MCHs (MicroTCA Carrier Hubs) as well as the CUs.
Multiple temperature sensors are included on-board to monitor for over-temp conditions within the module. The current is continuously measured for each of the modules and reported to MCH for any fault.
The firmware is upgradable via HPM.
Key Features
ØSingle module, full-size per AMC.0
Ø10 to 36 VDC input for 241W option and 18 to 36 VDC input for 460W option
ØSupport for power module redundancy
ØDual IPMI bus
Ø32-bit RISC processor
ØTwo banks of 256K flash for redundancy
ØField upgradable
ØIPMI 2.0 compliant
ØHPM.1 compliant
ØWithout the presence of an MCH the modules can be turned on
ØMenu driven software for ease of configuration
ØCurrent measure for each module
ØExternal as well as internal WDT
