产品详情
VPX IPMC
VPX IPMC
简介: VPX板卡的IPMI芯片
产品详情

The Intelligent Protocol Management Controller (IPMC) Software allows quick development of boards without prior IPMI knowledge. It provides all the mandatory IPMI functionality required by VITA46.11 specification.

The IPMC Software is a cost effective solution that enables very fast development of VPX boards. There are no royalties and for the standard version there aren't any upfront costs. The standard version of the IPMC Software can be customized to fulfill any particular requirements.

The software comes on pre-programmed microcontrollers and is accompanied by reference schematics and a complete set of GUI compilers for the SDR and FRU files.

The IPMC Software is compliant to HPM.1 and thus can be easily upgraded over IPMB-0 using a Shelf Manager with no need for external cables or custom software.

The IPMC Software can implement discrete, temperature, voltage, current, fan or OEM sensors . The SDRs for the standard version of software implement only a basic set of sensors.

Samway's IPMC Software is easy to use and has flexible ordering options. It can be delivered on a preprogrammed micro controller or as source code. The microcontroller used is a

Freescale Kinetis K10 hosted in a 64 pin LQFP package that needs 10 mm x 10 mm of PCB space.

The VPX Test card is a development platform intended for testing the Intelligent Protocol Management Controller (IPMC) Software for VPX. It provides all the mandatory IPMI functionality required by VITA46.11 specification and also instantiate all the hardware blocks supported by the IPMC for VPX software.


Key features

  • Compliant to IPMI 1.5

  • Compliant to  VITA46.11

  • Compliant to HPM.1 firmware upgrade

  • Easy to integrate

  • Flexible ordering options:

    • preprogrammed microcontroller

    • source code

  • Evaluation Board Available

  • Reference Designs Provided

  • GUI software for configuration

  • Cost Effective:

    • No upfront costs for standard version

    • No royalties

  • Analog inputs  for voltage, current or temperature measurements

  • External I2C for temperature measurements and communication with payload

  • Hot swap switch input, LEDs and payload power control outputs