The VT813 is an 8U μTCA.4 chassis that provides 12 AMC mid-size double module slots that can accept any AMC.1, AMC.2, AMC.3 and/or AMC.4. It provides FCLKA, TCLKA, TCLKB, TCLKC and TCLKD to each slot. The VT813 has full redundancy. It’s capable of having redundant MCH, power modules, as well as redundant cooling units for high availability. The four hot-plug capable power supplies can provide 1100W AC each for a total of 4400W.
Ports 2-3, 12-15 and 17-20 are connected among the slots per the uTCA.4 recommendation. The VT813 has a Telco Alarm as well as redundant FRU information devices and carrier locators. The VT813 has a JSM slot which routes to each JTAG port of the AMC. The VT813 has provision to route cables from the front to back via channel below the card cage.
Benefits
N+1 redundant PSUs for up to 4400W of power
Lightweight aluminum design in MTCA.4 format
Ideal for High Energy Physics and other applications requiring rear I/O
Cable channel below card cage for clean cable management going from front to back
Electrical, mechanical, software, and system-level expertise in house
Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
Key Features
μTCA.4 Chassis Platform with rear I/O
19” x 8U x 14.9” deep (with handles 16.23” deep)
Full redundancy with dual MicroTCA Carrier Hubs (MCH), dual cooling units and quad PSUs
Up to twelve AMCs: 12 mid-size double modules in front with 12 mid-size, double-module in the rear
Provision to route cables from the front to the back
Radial I2C bus to each AMC
High-speed 30 layer passive backplane (40GbE ready)
Redundant FRU information devices and carrier locators
Four 1.1 kW AC Power supply for 4.4 kW total
Telco aarm
FCLKA, TCKA, TCKB, TCLKC AND TCLKD
JTAG Switch Module (JSM) Slot
ESD Jack at the top front and back
