The AMC541 is based on Xilinx Zynq Ultrascale+ XCZU19EG MPSoC FPGAwith embedded Quad-core ARM Cortex-A53 application processing unit, DualcoreARM Cortex-R5 real time processing unit, ARM Mali - MP2 GPU. TheFPGA has Dual banks of 64-bit DDR4 memory (one bank to the ARM Coreand one bank to the FPGA).
The AMC541 has the TCI6638K2K communications infrastructure KeyStoneSoC which is a member of the C66x family based on TI’s new KeyStone IIMulticore SoC Architecture designed specifically for high-performancetelecommunication, IoT and networking applications. It features eightTMS320C66x DSP core subsystems (C66x CorePacs). The TMS320C66xinterfaces to dual 64-bit wide DRAM DDR-3.
The flexible architecture including multiplexer allows the FPGA and DSP tointerface to the AMC connector in different configurations. The AMC connectorports 2-3 and 8-11 are linked directly to the FPGA for the core to interface withthe host through multiple protocols such as SRIO, PCIe or 10/40GbE. Theports 4-7 can connect directly to the FPGA in addition to ports 8-11 or connectdirectly to the DSP with SRIO protocol via MUX selection (DIP-switchselection).
The module also routes GbE on ports 0 and 1 per AMC.2. The DSP and FPGAare linked via PCIe x2 and GbE.
The on-board, re-configurable FPGA interfaces to the AMC FCLKA (fabricclock) and TCLKA-D (user clocks and triggers) via a clock and jitter cleaner.
The module also has a front panel TRIG IN and CLK IN to the clock and jittercleaner.The front panel SFP+ cage allow expansion via fiber 1/10GbE or 1/10GbEcopper interface.
Key Features
Xilinx Zynq®UltraScale+™ XCZU19EG FPGA Multi Processor System on Chip (MPSoC)
TCI6638K2K Multicore DSP+ARM® KeyStone II System-on-Chip (SoC)
Dual bank of DDR-4 64-bit wide with ECC to FPGA/SOC (16GB total)
Dual banks of DDR3 64-bit wide with ECC to TCI6638 (16 GB total)
3 SFP+ connectors to the front panel
PCIe (AMC.1), 10/40GbE (AMC.2), SRIO (AMC.4) capability on ports 4-7 (x4) and 8-11 (x4) per FPGA load
SRIO x4 to DSP via MUX selection
GbE on ports 0,1 (AMC.2)
