The AMC583 provides a very capable I/O processing engine, with a large UltraScale™ FPGA coupled to two FMC+ sites and supported by an on-board quad-core P2040 processor. The FPGA has over 5,500 DSP slices and supported by 8 GB of DDR4 (32-bits wide over two banks).
The XCKU115 connects to all FMC+ LA/HA/HB pairs, DP00 to DP23 (the module does not support HSPCe connector), balancing high-speed I/O with impressive processing power. The AMC583 is compliant to theAMC.1, AMC.2 and/or AMC.4 specification, and optionally supports direct AMC-to-AMC connections over ports 12-15 and 17-20.
The quad core P2040 on-board host has x4 PCIe interface to the FPGA in addition to its local bus, and is supported by DDR3, Boot Flash and an SD Card. The user can select whether to route ports 0 and 1 of the AMC to the PPC or FPGA.
The dual FMC+ sites accept FMCs from VadaTech’s extensive range of data acquisition, networking and RF units, and other 3rd party VITA-57.4 compliant modules.
The AMC583 has Serial over LAN (SOL) per IPMI specification, with a hardware RNG for secure session.
Key Features
Xilinx UltraScale™ Kintex XCKU115 QorIQ PPC2040
AMC Ports 4-11 are routed to FPGA per AMC.1,AMC.2 and AMC.4 (protocols such as PCIe, SRIO, 10GbE, 40GbE, etc. are FPGA programmable)
AMC Ports 12-15 and 17-20 are routed to the FPGA
AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
Clock jitter cleaner
8 GB of DDR-4 (two banks of DDR-4)
Double module, mid-size AMC (full-size optional)
IPMI 2.0 compliant
