The ATC807 is a low cost AdvancedTCA 26 port of 10GbE and 26 ports of one Gigabit Ethernet switch that serves a number of egress ports with support for a rich set of Layer two managed software.
The module provides 8 ports of 10GbE via the front panel, two ports to the zone three, 15 port to the Fabric Channel and one port to the update channel. The 10GbE has a GbE routed to the one GbE switch.
Further, the module provides eight GbE ports in the front via RJ-45. In addition it has 15 ports routed to the Base Channel, two ports to the Shelf Manager and one port to the update channel. One of the front panel ports is routed to the 10GbE via a mux selection to allow the 1GbE and 10GbE to interface together. In addition two of the front panel ports have a mux selection which allows routing to Zone 3.
The IPMI management is utilizing VadaTech’s second generation IPMI management controller.
Key Features
ØAdvancedTCA open standard form factor
ØPICMG 3.1 compliant
ØManaged Layer 2 10GbE and 1GbE switch
Ø10GbE to the Fabric channel
Øfor 15 Node slots
Øoption 9 or 1 selectable per port basis
ØGbE to Base Interface for 15 Node slots plus two Shelf
ØEight SFP+ cages for 10GbE ports (each port can run as GbE or 10GbE)
ØEight front panel 10/100/1000 Mbit Ethernet ports via RJ-45
ØVLAN-based packet filtering
ØPacket classification using IEEE802.1p QoS
Ø9K Jumbo frames
ØSpanning tree, Mirroring, &QoS
ØSNMP and RMON
ØOS support for:
ØOS independent
